Distortions identification and compensation based on artificial neural networks using symmetrical components of the voltages and the currents

The problem of harmonics identifying and compensating has been of great interest in recent years. A new neural identification scheme for an active power filter (APF) is proposed. This scheme identifies the direct, inverse and zero sequence components of both the voltages and the currents of the power network. The components result from a new and generic decomposition of a three-phase signal which can be either the voltage or the current. For one signal, the direct components extraction requires two independent Adaline networks, and the inverse components extraction two other Adalines. The voltage and current components are used to on-line compute the instantaneous direct, inverse and zero sequence powers. The proposed decomposition is a new formulation of the instantaneous powers and is also appropriate for unbalanced systems. The reference compensation currents can be determined according to different compensation objectives. The resulting compensation currents are then re-injected phase-opposite through the APF in real-time. The performance is evaluated through several simulation examples and through different experiments. The results show that the proposed neural method outperforms other methods, such as the conventional instantaneous power theory.     

Self-assembly and characterization of layered double hydroxide/DNA hybrids

The purpose of this study was to control the fabrication of new labile supramolecular assemblies by formulating associations of DNA molecules with inorganic layered double hydroxides (LDHs). The results show that LDH/DNA hybrids synthesized by a coprecipitation route involving the in situ formation of LDHs around DNA molecules acting as templates were characterized by a lamellar organization, with DNA molecules sandwiched between hydroxide layers, exhibiting a regular spacing of 1.96 nm. Our results indicate that labile complexes resulting from the association of nucleic acids and inorganic materials can be obtained not only by anion exchange but also by a direct self-assembly route.     

Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich

Drilling and fastening of hybrid materials in one-shot operation reduces cycle time of assembly of aerospace structures. One of the most common problems encountered in automatic drilling and riveting of multimaterial is that the continuous chips curl up on the body of the tool. Drilling of carbon fiber reinforced plastic (CFRP) is manageable, but when the minute drill hits the aluminium (Al) or titanium (Ti), the hot and continuous chips produced during machining considerably damage the CFRP hole. This study aims to solve this problem by employing nano-coated drills on multimaterial made of CFRP and aluminium alloy. The influence of cutting parameters on the quality of the holes, chip formation and tool wear were also analyzed. Two types of tungsten carbide drills were used for the present study, one with nano-coating and the other, without nano coating. The experimental results indicated that the shape and the size of the chips are strongly influenced by feed rate. The thrust force generated during drilling of the composite plate with coated drills was 10–15% lesser when compared to that generated during drilling with uncoated drills; similarly, the thrust force in the aluminium alloy was 50% lesser with coated drills when compared to thrust force generated without coated drills. Thus, the use of nano-coated drills significantly reduced the surface roughness and thrust force when compared with uncoated tools.     

A simulation of doping and trap effects on the spectral response of AlGaN ultraviolet detectors

We study, by means of numerical simulation, the impact of doping and traps on the performance of the “solar blind” ultraviolet Schottky detector based on AlGaN. We implemented physical models and AlGaN material properties taken from the literature, or from the interpolation between the binary materials (GaN and AlN) weighted by the mole fractions. We found that doping and traps highly impact the spectral response of the device, and in particular a compromise in the doping concentration must be reached in order to optimize the spectral response of the detector. These results give us a powerful tool to quantitatively understand the impact of elaboration and processing conditions on photodetector characteristics, and thus identify the key issues for the development of the technology.     

Étude de l'influence de l'évaporation d'un bac d'eau sur les transferts dans un canal corrugué

The authors present a numerical and experimental study on heat and mass transfers by forced convection in a channel with a sinusoidal protuberance and by natural convection in a reservoir full of water. The numerical study has been carried out for Reynolds numbers in a range of 35 to 350, several densities of heat flux and protuberance amplitude range of 0.005 to 0.02 m. Results show that the vapour diffusion in the air modifies the stream function profiles which become convex over the free surface of the water. In addition, the evaporation reduces the perturbation caused by the protuberance and increases the heat transfer rate in the channel. The visualisation of the flow, using smoke, an argon laser and a videocamera, shows the complexity of the interaction between the flow of vapour caused by the evaporation, the flow in the channel and the heat losses across the lateral walls. Theoretical and experimental results are in good qualitative agreement.     

Assessment of olive pomace wastes as flame retardants

Olive pomace (OP) is a lignocellulosic waste from olive oil industry. In order to valorize these wastes as flame retardant (FR) fillers into polymers, OP residues are milled and screened into three different fractions. Two strategies are then investigated. The first one is to modify OP particles by phosphorus molecules using radiation grafting as already done successfully with flax. Nevertheless, pyrolysis combustion flow calorimetry analyses show that the introduction of phosphorus does not promote charring of OP and flame retardancy is not significantly improved whichever the considered fraction. The second strategy is to replace pentaerythritol by OP as char source into well-known FR systems based on ammonium polyphosphate. The incorporation of such system into ethylene-vinyl acetate copolymer leads to satisfying FR performances according to cone calorimeter tests. Moreover, the presence of high amount of extractives into OP such as oleic acid does not appear detrimental. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 47715.     

Numerical study of soft adhesively bonded joints in finite elasticity

In this paper we present a numerical study of thin layers. This approach can modelise bonding phenomena or interfaces of composite materials. The considered layers have a hyperelastic behaviour. The study of the asymptotic problem, when the thickness and the rigidity parameters of the layer tend to zero, yields a limit problem with an interface law on the surface to which the layer shrinks. The limit problem keeps in memory the mechanical and geometrical properties of the layers in the sense that the relative behaviour of the limit values of stiffness and thickness of the layers appears in the interface law. By a numerical study of these problems, we aim to find quantitative conditions on the thickness in order to compare the results of the problem with an effective layer and those of the limit problems.     

Simulation of the forming of mash seam welded sheets

The paper presents results on the optimization of the process of mash seam welding for improving the formability of the joined sheet metal semi-products. An integrated concept including the welding, smoothing and heat treatment of mash welded sheets has been developed. As an example, fatigue tests and the simulation of the forming behaviour of a mash seam welded tensile specimen simulated by the finite element method (FEM) is discussed. The determination of the material properties of the seam which, so far, have been determined experimentally is thus considerably simplified.